sales@zjblowmolding.com
The Automatic plastic HDPE open head 80u drum blow molding machine is used to make abs car hollow products , A wide variety of materials can be used for the machine, which are suitable for producing 10-30L PE bottle. Extrusion system using a hard gear reducer and inverter. The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.
| Model No | Unit | SX-S30L | SX-S60L | |
| Max.volume | L | 28 | 55 | 80 |
| Dry cycle | pc/hr | 600 | 450 | 360 |
| Screw Diameter | mm | 80 | 90 | 100 |
| Screw L/D radio | L/D | 25~28 | 25~28 | 25~28 |
| Screw motor power | Kw | 30~37 | 37~45 | 45~55 |
| Screw heating power | Kw | 6.2~8.2 | 7.3~9.1 | 8.4~10.5 |
| No.of heating zone | Zone | 4 | 4 | 5 |
| Output of HDPE/HDPE | Kg/hr | 100~120 | 120~150 | 180~220 |
| Oil pump drive power | Kw | 30 | 37 | 45 |
| Clamping force | Kn | 215 | 260 | 300 |
| Open stroke | mm | 350~800 | 450~1000 | 500~1200 |
| Size of Mold | mm | 550*650 | 760*900 | 800*1000 |
| MaxMax.die diameter | mm | 300 | 350 | 420 |
| Die heat capacity | Kw | 5.2 | 7.5 | 9.2 |
| Blowing pressure | Mpa | 0.8 | 0.8 | 0.8 |
| Air consumption | M3/Min | 0.8 | 1 | 1.2 |
| Cooling water pressure | Mpa | 0.3 | 0.4 | 0.5 |
| Water consumption | L/min | 60 | 85 | 100 |
| Weigt | Ton | 12 | 14.5 | 16 |
| Dimension (L*W*H) | M | 4.5*2.1*3.8 | 5.2*2.2*4 | 5.4*2.2*4.5 |
